MEDIUM WAVE INFRARED

Medium Wave Infrared Heating Lamps

Uncoated 4N low-OH quartz infrared lamps for continuous process heating — PV module lines, semiconductor equipment, vacuum coating and advanced ceramics.

View Specifications Request a Quote

Medium wave infrared lamp bank at full operating temperature
≥ 40,000 h
Design life
≤ ±2 °C
Axial uniformity
≤ 4 mm
Sag at full power
≥ 99.99%
SiO₂ content

Standard sizes

Model IR-3195
Total 3195 ± 0.5 mm · Heated 2900 mm · Φ30 ± 0.2 mm
Model IR-3620
Total 3620 ± 0.5 mm · Heated 2720 mm · Φ30 ± 0.2 mm

Where they are used

PV module manufacturing equipment
Lamination and continuous process heating lines for solar module production.
Semiconductor process equipment
Stable radiant heating for wafer handling and process chambers.
Vacuum coating equipment
Uniform infrared heating under vacuum conditions.

Before You Order: Six Checks

You do not need to read every datasheet first — run through these six points in order.

1 · Total length and heated length
Two numbers, not one: the overall length that must fit your machine and the zone that must actually radiate. Standard sizes are 3195 mm / 2900 mm and 3620 mm / 2720 mm.
2 · Tube diameter and wall
Φ30 mm tube with 3 mm wall is our standard. Confirm the mounting clamps and the free space around the lamp before changing diameter.
3 · Supply voltage and power
Lamps run on AC 380 V ±10%. Rated power is built to your order with deviation ≤ ±3% — tell us the power you need, not the power you think we stock.
4 · Process temperature and cycle
Send the working temperature and the cycle time. Our reference duty is 260 min per cycle with 100–500 °C steps; uniformity is held to ≤ ±2 °C at 70 mm from the surface.
5 · Mounting, support and sag
With supports 30 mm inboard from each end, sag is ≤ 2.5 mm cold and ≤ 4 mm at full power. Confirm the support points and the clearance to the product or reflector.
6 · Life, quantity and spares
Design continuous life is ≥ 40,000 h (about 5 years) with power decay ≤ 20%. Tell us the quantity and the maintenance window so spares can be shipped together.

Not sure about one of them? Send the data you have — drawings, photos or a nameplate are enough to start. Send your requirement →

Also available: quartz tubes & fabricated parts

Clear fused quartz tube
Quartz Tubes & Parts →
Tubes, plates, boats and instruments for diffusion, CVD, PECVD and crystal-growth furnaces. Φ130–800 mm, wall 3–20 mm, lengths to 4.5 m.
Quartz Material Data →
Softening point 1730 °C, service to 1200 °C, expansion coefficient table and burst pressure by tube size.

Built to national standards

GB/T 14034-2008 《石英玻璃管》 · GB/T 24199-2009 《红外加热管通用技术条件》 · JC/T 598-2007 《石英玻璃管》

Common questions

What material is the lamp tube made of?
High-purity 4N low-OH quartz with SiO₂ content ≥ 99.99% and hydroxyl (OH) content ≤ 5 ppm. The tube is supplied uncoated.
What voltage do the lamps run on?
AC 380 V ±10%. Rated power is customised to each order, with deviation held to ≤ ±3%.
How uniform is the heating?
Temperature difference between any two points measured 70 mm from the lamp surface is ≤ ±2 °C.

All questions →

Ordering & Delivery

Warranty is a guaranteed minimum period; design life is stated separately in the technical data. Send your model list and quantities for a confirmed lead time.

Warranty — infrared heating lamps3,000 hours
Warranty — quartz tubes1 year
Payment100% before shipment
Lead timeConfirmed per model and quantity

Get a Quote

Talk to an engineer

Send us the specification you need — dimensions, voltage, operating temperature, quantity. We answer within one working day.